This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Trying to build the ultimate Solar/Inverter setup for my 40-ft RV. I have purchased two Tesla Power Modules and I am planning on using a MultiPlus 24/3000, Color Control GX, Battery Protect 220, BMV 712. Question: Does the Color Control GX include all the features of the Venus GX, or do I still need both for full remote smartphone capability and auto genset start? It looks like the Venus is not needed
I have just the page for you!
GX Product Family comparison of Venus-devices:
One item I found the Venus has but not the Color GX after I bought the Color GX for the local console. The Venus supports multiple tank monitors natively. So if you also want to add some tank monitors for the RV, you might consider the Venus. Just make sure to read both sets of documentation. Here’s a video I did on the monitoring using Victron components on my 27 foot travel trailer.
https://youtu.be/bdJ2nFKNLqk
It’s part of a series I am doing using all Vict on components with Lithium batteries.
Hi,
the main difference is, that the Color Control GX has a local display and the Venus GX has not. Both devices are running Venus as operating system and offer a remote console, wich is viewable on your smartphone. It is possible to control a genset with both devices.
For the ultimate solar setup, I would consider adding a Victron MPPT too ;o)
Regards,
Markus
My Current Design is (2) Tesla 5.62kWh modules, a MultiPlus 24/3000 Inverter, a SmartSolar 150/100 MPPT, 220 Battery Protect, a 712, 4 tank monitor sensors, and (6) 435W Sunpower PV panels
