question

ctw0307 avatar image
ctw0307 asked

Historical data graph displays battery voltage in percentage instead of voltage

the battery voltage was displayed in voltage and then it started displaying in percentage. I read one answer that said it was a “bug” in VRM?

VRM
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Stefanie (Victron Energy Staff) avatar image
Stefanie (Victron Energy Staff) answered ·

@ctw0307@sbcglobal.net

Make sure you have "Show details" clicked. That should bring back both, voltage and SoC in percentage.

bildschirmfoto-2023-04-16-um-210427.png


bildschirmfoto-2023-04-16-um-210427.png (24.4 KiB)
3 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

ctw0307 avatar image ctw0307 commented ·

I have “show details “ turned on.

I’m not seeing my “House ESS” and I’m not using ESS. I’m looking at my installation dashboard, historical data, system overview, consumption/solar/battery graph.I’m seeing details and the graph is showing voltage as percentage not actual voltage. It was showing actual voltage and now it is maxed out at 100%. I could have changed something unintentionally, I’m new and learning.

0 Likes 0 ·
Show more comments