This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Is there any information about an API or a remote access so that the/some parameters can be updated programmatically?
I tried connecting by ssh using the admin credentials, but it seems like a very limited shell that just displays some "File system content".
I also listened to the POST request when calling the settingsSave method but the request is encrypted.
I'm looking in particular to be able to modify the scheduler using an external program.
There are nodered nodes for pulling and pushing settings/data
Hi Lucian,
just for my understanding:
- When EVCS is in off grid mode
- And backup battery will start draining (because solar power drops) and cannot deliver enough power to supply car charging and backup battery charging at the same time, then a timer starts and EVCS will stop charging.
But afterwards backup battery starts charging again and after a timer EVCS starts charging again (and stops again)...
Result is EVCS does: Timer 40s - START - timer 65s - STOP - timer 40s - START - timer 65s - STOP ..... and so on. (I've modified timers using Modbus)
HOW can I tell my EVCS NOT to STOP charging even if my backup battery starts draining (until SoC treshold is reached)?
Because I thougt this paramert is exactly for that reason available:
BTW: I'm not connected to the grid, there is a generator (Phoenix) connected to AC in, but if I disconnect the generator the behavior is exacly the same!
Ok, i understand.
It would be really great if this will be possilble very soon, because this on/off behaviour is for sure not really good for my car.
And I am sure I'm not the only one begging for this feature ;-)
Over Modbus TCP you can modify lots of parameters. For example, you can keep the scheduled logic outside the device, and just star/stop it when necessary. Have fun! :)
| Unit-id: 1 | ||||||
| Address | Description | Type | Range | Default | Access | Notes |
| 5000 | Product ID | uint16 | 0 to 65535 | - | R | 0xc024 or 0xc025 or 0xc026 - const |
| 5001 | string | - | R | 6 registers, 12 characters | ||
| 5007 | FW version H | uint16 | 0 to 65535 | - | R | HH: major number (8bit) |
| 5008 | FW version L | uint16 | 0 to 65535 | - | R | MM: minor number(8bit), LL: revision number(8bit) |
| 5009 | Charge mode | uint16 | 0 to 1 | 0 | R/W | 0 - manual, 1 - auto, 2 - scheduled |
| 5010 | Start/stop charging | uint16 | 0 to 1 | - | R/W | 0 - stop, 1 - start |
| 5011 | L1 power used | uint16 | 0 to 65335 | - | R | W |
| 5012 | L2 power used | uint16 | 0 to 65335 | - | R | W |
| 5013 | L3 power used | uint16 | 0 to 65335 | - | R | W |
| 5014 | Total power | uint16 | 0 to 65335 | - | R | W |
| 5015 | Charger status | uint16 | 0 - 23 | - | R | 0 - disconnected, 1 - connected, 2 - charging, 3 - charged, 4 - waiting for sun, 5 - waiting for RFID, 6 - waiting for start, 7 - low SOC, 8 - ground test error, 9 - welded contacts test error, 10 - CP input test error (shorted) 11 - Residual current detected 12 - Undervoltage detected 13 - Overvoltage detected 14 - Overheating detected 15 - Reserved 16 - Reserved 17 - Reserved 19 - Reserved 20 - Charging limit 21 - start charging 22 - switching to 3 phase 23 - switching to 1 phase |
| 5016 | Charging current | uint16 | 6 to 32 | 6 | R/W | A (for manual mode) |
| 5017 | Max current | uint16 | 6 to 32 | 10 | R/W | A |
| 5018 | Charging current actual | uint16 | (0 to 32)*10 | - | R | A*10 (actual value of current) |
| 5019 | Total charging time H | uint16 | 0 to 65535 | - | R | s |
| 5020 | Total charging time L | uint16 | 0 to 65535 | - | R | s |
| 5021 | Total charging power | uint16 | 0 to 65535 | - | R | kWh*100 |
| 5022 | Total charging cost | uint16 | 0 to 65535 | - | R | €*100 |
| 5025 | CP voltage | uint16 | 0 to 1200 | - | R | V*100 |
| 5026 | Charger position | uint16 | 0 to 1 | 0 | R/W | 0 - Inverter Ac Out, 1 - Inverter Ac Input |
| 5027 | Device name | string | - | R/W | UTF-8 encoded string, 22 registers, 44 bytes | |
| 5049 | Charger autostart | uint16 | 0 to 1 | 1 | R/W | 0 - autostart disabled, 1 - autostart enabled |
| 5050 | Control via display | uint16 | 0 to 1 | 1 | R/W | 0 - control disabled, 1 - control enabled |
| 5051 | Display active backlight | uint16 | 1 to 100 | 100 | R/W | % |
| 5052 | Display idle backlight | uint16 | 1 to 100 | 7 | R/W | % |
| 5053 | Display active timeout | uint16 | 1 to 65535 | 120 | R/W | s |
| 5054 | Contactor active when charged | uint16 | 0 to 1 | 0 | R/W | 0 - contactor disabled, 1 - contactor enabled |
| 5055 | Manual mode phase | uint16 | 0 to 1 | 1 | R/W | 0 - 3Phase, 1 - Single Phase |
| 5056 | Auto mode phase | uint16 | 0 to 2 | 1 | R/W | 0 - 3Phase, 1 - Single Phase, 2 - Single+3Phase |
| 5057 | Power for 3phase | uint16 | 1 to 65535 | 4800 | R/W | W |
| 5058 | Power for single phase | uint16 | 1 to 65535 | 4300 | R/W | W |
| 5059 | Phase switching timeout | uint16 | 1 to 65535 | 60 | R/W | s |
| 5060 | CP Calibration command | uint16 | 1 to 4 | - | R/W | 1 - calibration start 2 - car is connected 3 - reserved 4 - calibration abort |
| 5061 | CP Calibration status | uint16 | 0 to 4 | - | R | 0 - idle 1 - in progress 2 - successfully 3 - failed 4 - aborted |
| 5062 | Min current | uint16 | 6 to 31 | 6 | R/W | A |
| 5063 | Power calibration offset | uint16 | 60 - 140 | 100 | R/W | From 0.6 to 1.4 multiplied by 100 |
| 5064 | EVCS reset | uint16 | 1 | - | R/W | 1 - reset command for EVCS |
| 5065 | Auto mode type | uint16 | 0 to 1 | 0 | R/W | 0 - Feed in, 1 - Battery powered |
| 5066 | Backup battery SOC for start charging in Battery powered | uint16 | 1 to 100 | 90 | R/W | % |
| 5067 | Backup battery min SOC to allow charging if OFF Grid | uint16 | 1 to 100 | 20 | R/W | % |
| 5068 | Backup battery emulation | uint16 | 0 to 1 | 0 | R/W | 0 - disabled, 1 - enabled |
| 5069 | 'Feed in'. Start delay | uint16 | 1 to 65535 | 30 | R/W | s |
| 5070 | 'Feed in'. Stop delay | uint16 | 1 to 65535 | 60 | R/W | s |
| 5071 | 'Feed in'. Single phase. Grid power for start | int16 | -32768 to +32767 | -500 | R/W | W |
| 5072 | 'Feed in'. Multi phase. Grid power for start | int16 | -32768 to +32767 | -1400 | R/W | W |
| 5073 | 'Feed in'. Grid power threshold for increase | int16 | -32768 to +32767 | -250 | R/W | W |
| 5074 | 'Feed in'. Grid power threshold for decrease | int16 | -32768 to +32767 | 250 | R/W | W |
| 5075 | 'Feed in'. Backup battery discharging power threshold | int16 | -32768 to +32767 | -100 | R/W | W |
| 5076 | 'Feed in'. Current step | uint16 | 1 to 65535 | 2 | R/W | A*10 |
| 5077 | 'Feed in'. Time step | uint16 | 1 to 65535 | 1000 | R/W | ms |
| 5078 | 'Battery powered'. Start delay | uint16 | 1 to 65535 | 30 | R/W | s |
| 5079 | 'Battery powered'. Stop delay | uint16 | 1 to 65535 | 60 | R/W | s |
| 5080 | 'Battery powered'. Start abort delay | uint16 | 1 to 65535 | 5 | R/W | s |
| 5081 | 'Battery powered'. BKPB balance power | uint16 | 0 to 65535 | 500 | R/W | W |
| 5082 | 'Battery powered'. BKPB balance SOC max | uint16 | 1 - 100 | 98 | R/W | % |
| 5083 | 'Battery powered'. Available sun power threshold for start | uint16 | 0 to 65535 | 100 | R/W | W |
| 5084 | 'Battery powered'. Grid power threshold for start | uint16 | 0 to 65535 | 25 | R/W | W |
| 5085 | 'Battery powered'. BKPB power threshold for decrease | uint16 | 1 to 65535 | 250 | R/W | W |
| 5086 | 'Battery powered'. Grid power threshold for decrease | uint16 | 1 to 65535 | 250 | R/W | W |
| 5087 | 'Battery powered'. Discharging detect timeout | uint16 | 1 to 65535 | 7 | R/W | s |
| 5088 | 'Battery powered'. Next try timeout for increase | uint16 | 1 to 65535 | 45 | R/W | s |
| 5089 | 'Battery powered'. Time step | uint16 | 1 to 65535 | 15 | R/W | s |
| 5090 | 'Battery powered'. Current step | uint16 | 1 to 65535 | 10 | R/W | A*10 |
Is there an updated list available?
I also could read some values 5028/5029/5030 etc. which are not in the above list.
And some ranges and values do not match...
| 5000 | -16347 | 49189 | 0xC025 | Response ok |
| 5001 | 20808 | 20808 | 0x5148 | Response ok |
| 5002 | 12850 | 12850 | 0x3232 | Response ok |
| 5003 | 14641 | 14641 | 0x3931 | Response ok |
| 5004 | 19802 | 19802 | 0x4D5A | Response ok |
| 5005 | 22871 | 22871 | 0x5957 | Response ok |
| 5006 | 65 | 65 | 0x0041 | Response ok |
| 5007 | 1 | 1 | 0x0001 | Response ok |
| 5008 | 9727 | 9727 | 0x25FF | Response ok |
| 5009 | 1 | 1 | 0x0001 | Response ok |
| 5010 | 0 | 0 | 0x0000 | Response ok |
| 5011 | 0 | 0 | 0x0000 | Response ok |
| 5012 | 0 | 0 | 0x0000 | Response ok |
| 5013 | 0 | 0 | 0x0000 | Response ok |
| 5014 | 0 | 0 | 0x0000 | Response ok |
| 5015 | 4 | 4 | 0x0004 | Response ok |
| 5016 | 8 | 8 | 0x0008 | Response ok |
| 5017 | 15 | 15 | 0x000F | Response ok |
| 5018 | 0 | 0 | 0x0000 | Response ok |
| 5019 | 0 | 0 | 0x0000 | Response ok |
| 5020 | 6057 | 6057 | 0x17A9 | Response ok |
| 5021 | 382 | 382 | 0x017E | Response ok |
| 5022 | 46 | 46 | 0x002E | Response ok |
| 5023 | 0 | 0 | 0x0000 | Response ok |
| 5024 | 0 | 0 | 0x0000 | Response ok |
| 5025 | 784 | 784 | 0x0310 | Response ok |
| 5026 | 0 | 0 | 0x0000 | Response ok |
| 5027 | 24919 | 24919 | 0x6157 | Response ok |
| 5028 | 27756 | 27756 | 0x6C6C | Response ok |
| 5029 | 28514 | 28514 | 0x6F62 | Response ok |
| 5030 | 120 | 120 | 0x0078 | Response ok |
| 5031 | 0 | 0 | 0x0000 | Response ok |
| 5032 | 0 | 0 | 0x0000 | Response ok |
| 5033 | 0 | 0 | 0x0000 | Response ok |
| 5034 | 0 | 0 | 0x0000 | Response ok |
| 5035 | 0 | 0 | 0x0000 | Response ok |
| 5036 | 0 | 0 | 0x0000 | Response ok |
| 5037 | 0 | 0 | 0x0000 | Response ok |
| 5038 | 0 | 0 | 0x0000 | Response ok |
| 5039 | 0 | 0 | 0x0000 | Response ok |
| 5040 | 0 | 0 | 0x0000 | Response ok |
| 5041 | 0 | 0 | 0x0000 | Response ok |
| 5042 | 0 | 0 | 0x0000 | Response ok |
| 5043 | 0 | 0 | 0x0000 | Response ok |
| 5044 | 0 | 0 | 0x0000 | Response ok |
| 5045 | 0 | 0 | 0x0000 | Response ok |
| 5046 | 0 | 0 | 0x0000 | Response ok |
| 5047 | 0 | 0 | 0x0000 | Response ok |
| 5048 | 0 | 0 | 0x0000 | Response ok |
| 5049 | 1 | 1 | 0x0001 | Response ok |
| 5050 | 1 | 1 | 0x0001 | Response ok |
| 5051 | 50 | 50 | 0x0032 | Response ok |
| 5052 | 5 | 5 | 0x0005 | Response ok |
| 5053 | 120 | 120 | 0x0078 | Response ok |
| 5054 | 1 | 1 | 0x0001 | Response ok |
| 5055 | -1 | 65535 | 0xFFFF | Response ok |
| 5056 | -1 | 65535 | 0xFFFF | Response ok |
| 5057 | -1 | 65535 | 0xFFFF | Response ok |
| 5058 | -1 | 65535 | 0xFFFF | Response ok |
| 5059 | -1 | 65535 | 0xFFFF | Response ok |
| 5060 | 0 | 0 | 0x0000 | Response ok |
| 5061 | 0 | 0 | 0x0000 | Response ok |
| 5062 | 8 | 8 | 0x0008 | Response ok |
| 5063 | 100 | 100 | 0x0064 | Response ok |
| 5064 | 0 | 0 | 0x0000 | Response ok |
| 5065 | 1 | 1 | 0x0001 | Response ok |
| 5066 | 35 | 35 | 0x0023 | Response ok |
| 5067 | 30 | 30 | 0x001E | Response ok |
| 5068 | 0 | 0 | 0x0000 | Response ok |
| 5069 | 30 | 30 | 0x001E | Response ok |
| 5070 | 60 | 60 | 0x003C | Response ok |
| 5071 | -500 | 65036 | 0xFE0C | Response ok |
| 5072 | -1400 | 64136 | 0xFA88 | Response ok |
| 5073 | -250 | 65286 | 0xFF06 | Response ok |
| 5074 | 250 | 250 | 0x00FA | Response ok |
| 5075 | -100 | 65436 | 0xFF9C | Response ok |
| 5076 | 2 | 2 | 0x0002 | Response ok |
| 5077 | 1000 | 1000 | 0x03E8 | Response ok |
| 5078 | 30 | 30 | 0x001E | Response ok |
| 5079 | 60 | 60 | 0x003C | Response ok |
| 5080 | 10 | 10 | 0x000A | Response ok |
| 5081 | 500 | 500 | 0x01F4 | Response ok |
| 5082 | 98 | 98 | 0x0062 | Response ok |
| 5083 | 100 | 100 | 0x0064 | Response ok |
| 5084 | 25 | 25 | 0x0019 | Response ok |
| 5085 | 250 | 250 | 0x00FA | Response ok |
| 5086 | 250 | 250 | 0x00FA | Response ok |
| 5087 | 7 | 7 | 0x0007 | Response ok |
| 5088 | 45 | 45 | 0x002D | Response ok |
| 5089 | 15 | 15 | 0x000F | Response ok |
| 5090 | 10 | 10 | 0x000A | Response ok |
| 5091 | -100 | 65436 | 0xFF9C | Response ok |
| 5092 | 0 | 0 | 0x0000 | Response ok |
| 5093 | 0 | 0 | 0x0000 | Response ok |
| 5094 | 0 | 0 | 0x0000 | Response ok |
| 5095 | 0 | 0 | 0x0000 | Response ok |
| 5096 | 0 | 0 | 0x0000 | Response ok |
| 5097 | 0 | 0 | 0x0000 | Response ok |
| 5098 | 0 | 0 | 0x0000 | Response ok |
| 5099 | 0 | 0 | 0x0000 | Response ok |
Sorry, not yet. As soon as we have an updated version, we will share it
Can you please add what those registers are intendet for.
Maybe there is an aswer for some of the problems some users have, including me ;-.)
