question

lmnewey84 avatar image
lmnewey84 asked

Multiple JK BMS (90kwh battery) and Cerbo

Hey guys does anyone know if the JK BMS is going to be added as a supported bms at some point ?

just sharing a battery we have built to off grid our house, its 96 cells of lithium 3.2v@302ah

We've arranged it in 3 packs of 30kwh. each pack has an individual BMS but I haven't figured out how to get them to talk to the Cerbo just yet
­ Our Battery

Anyway we have been recording out progress to date
Increasing our charge current to 250amps: https://youtu.be/5aprNANUkNA
Part 2 – adding the 3rd shelf https://youtu.be/43QSbPCPqlM
Part 1 – cleaning up the cabling and installing https://youtu.be/aDVoKK7jrrQ


BMS
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
der-neue-hier avatar image
der-neue-hier answered ·

look YT

How To: JK BMS in Victron Venus OS

https://www.youtube.com/watch?v=BrH3LZZJKzk&t=958s&ab_channel=fl_dutch

2 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

lmnewey84 avatar image lmnewey84 commented ·
i beleive this only works for a single bms not multiple, multiple nodes can run but only one of them impacts the charge and discharge. i need all three to work
0 Likes 0 ·
Show more comments
marcve avatar image
marcve answered ·

"der-neue-hier" already answered your question, but as addition. It is working really well. And....take care you have all the settings correct.

screenshot-2023-04-15-at-214712.png

screenshot-2023-04-15-at-214722.png


screenshot-2023-04-15-at-214712.png (105.2 KiB)
screenshot-2023-04-15-at-214722.png (127.6 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.