This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
I use MultiPlus II 48/1600/20, CCGX, MPPT Solar Charger 100/20 and third party BMS 48V-100Ah LiFePo battery. During the sunny day, the Solar Power drops from max to 0 few times a minute. Inverter started to discharge the battery until the PV Power raise. System configured with ESS and "Keep batteries charged" mode. Without DVCC. The differents between dashboard screenshots is actually few seconds. Could anyone help me?
I'm suppose that problem was solved. My consumption was equal 260W but the Solar Power on peak reached 800W. And with feed-in disable - the excess energy had nowhere to go. When I increase the charge current on MPPT to 7A (7*48=336W), which is enough to cover the consumption - the problem disappeared.
Hi, there isn't enough to go on.
Pull vrm charts (or use victron connect) to show what PV voltage is vs battery voltage.
Panel voltage could be dipping beneath the battery +6V threshold and moving to an off state.
Pull charts that show the BMS CVL and CCL. The BMS may be limiting the MPPT via DVCC.
Or you could have a bad connection, wiring or panel.
Any number of reasons.
BMS is not connected to the system. It's only built in battery.
DVCC is disabled.
I see that MPPT state occurs Fault frequently. How can I find out why?
