This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
I'm building off-grid system with Multiplus II, Victron MPPT, Battery Protect and non Victron lifepo battery. These devices have some monitoring and control capabilities and in addition there are the many dedicated devices for that. Is there by any chance a table which compares what functions can be controlled and monitored by different Victron devices? I have read the prochures and it just made me more confused...
You are right there is quite a range.
Are you referring to the GXs as in the ccgx, venus, cerbo etc? Those all do the same thing, that is allow local monitoring and online monitoring over the VRM.
If so, get the cerbo.... or the cerbo s of you are not planning anything extra.
https://www.victronenergy.com/panel-systems-remote-monitoring
Cerbo S seems nice. Can I use Multiplus II temperature sensor instead then?
Still another question: Cerbo and/or Multiplus can act as battery monitor also, so no need to add shunt etc?
It will be worth considering a BMS solution for your LifePO4 batteries that transmits data to the system. It makes things just so much easier and monitoring easier too. Cannot stress the design and requirements phase enough, also taking into accout future system expansion. The devil is in the detail e.g. there is only one VE.Direct on MP-II GX for an MPPT or Shunt and while USB hubs and other interface cables can be used to add more devices, it can pose challenges that could have been avoided from the outset. Also think carefully of mounting and distances between individual components given extending cables is not ideal and Victron cables typically don't reach to the moon and back. This and lots more to think about, but well worth it if you get it right.
