Hello I've an MPPT 100/30 and it only charging my battery onices then just saying it full? I needed to unplug the slower MPPT and then replug it for it to charge onice more any helps would be amazing peace ✌️
asked
Only getting one full charge
The slower mppt? So you have more than one. Maybe your battery does not need the charge.
Does the battery voltage drop?
Usually a battery will be charged, then drop to float. A new charge cycle only begins after it drops below float past the rebulk value.
If it does not then it will not charge again.
To customize the rebulk see these instructions.
Thanks for your reply been looking at setting still no luck my battery is totally flat now with no power at all gonna have another look tomorrow when sun is out
Please post screen shots of both the MPPT battery settings and tell use exactly which batteries you have. Screen shots of the initial Victron connect page for both MPPTs also.
Hi I have two L35-110 Avon leisure battery that are linked together as one. Here is screen shot of what the MPPT it is showing full battery when it's flat 
Here are the screen shots of my battery settings thanks for all your help guys this my first time doing anything solar solar so totally new to this 
@MCMatthias given your mppt reads 13.8v, and your battery reads 12v, there seems to be a disconnection between the mppt and battery.
Please check your fuse / breaker and cabling between the mppt and battery.
Just checked my fuse and unplug all the cable and plug them back in its now on bulk charge just hope it fixed thanks for all your help
Still had same issue only one charge gonna unplug everything else so it's just solar and battery to see if some is interfering with the reading
