question

donshaddarnur avatar image
donshaddarnur asked

BlueSmart IP65 Charger 12/10 - Error Codes?

Hello everybody,

my new charger work only one day, now it doesn‘t work. No funktion. When I push and hold the „Mode“ button, the three blue LEDs and the three lower yellow LEDs blinking 3 times, then pause and so on.


If there an error code list to check the blinking code?

It is connected to a LiFePo4 battery. The charger is in the lithium mode before the first connect.


Many thanks.


Best regards,

André

charger
1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

donshaddarnur avatar image donshaddarnur commented ·
PS: When I disconnect it from the battery, there is the same issue. Disconnect from 230V and connect after 60 seconds, the same issue again.
0 Likes 0 ·
1 Answer
donshaddarnur avatar image
donshaddarnur answered ·

Hello,

any ideas?

Thanks André

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Chargers.

Additional resources still need to be added for this topic