question

effem avatar image
effem asked

SmartSolar MPPT 100/20 - load output

Hi, the output channel of this MPPT is 12V stabilized?

The voltage is stabilized to 12V or is variable and not there is difference with voltage of battery poles.

Thanks,

Francesco

MPPT Controllers
1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

effem avatar image effem commented ·

Tip: the LOAD output voltage

0 Likes 0 ·
2 Answers
Elimac avatar image
Elimac answered ·

From my experience, you will see aproximately the same voltage as the battery has.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

effem avatar image
effem answered ·

Ok, so it is not stabilized at 12v.

Thanks,

Francesco

2 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Elimac avatar image Elimac commented ·

The unit I have is actually being used in a 24V system, so, no, it would have to have two stabilizing stages, one for each voltage...

0 Likes 0 ·
Trina avatar image Trina commented ·

My 100/15-smart is whatever battery is as well, so can confirm that.

0 Likes 0 ·