We are facing the follwing problem:
Our EVCS is connected to our CerboGX. In the settings of the EVCS the GX Device Communication is enabled (standard setting - see picture):
Once our LAN failed and the GX Device had no Connection to the EVCS --> Charging wasn´t possible.
We tried to start the charging process in Manual and Automatic Mode.
Every time the failure "LOW SOC" was shown.
Charging was possible again after deactivating the GX Device communication in the menue of the EVCS via AP Mode.
In my opinion charging should be allowed when a LAN Error occurs.
Is there a better solution than disabling the GX communication to start a charging process when network is failing ?