question

thorben avatar image
thorben asked

Unexpected current/voltage step with Multiplus 12/500/20 while charging LiFePO4

Hi everyone,

I set my Multiplus 12/500/20 to LiFePO4 charging curve yesterday when I replaced my former AGM with my new LiFePO4 (integrated BMS) in a camper van. Now I just had a look at the overnight charging curves and I am a little bit curios what triggered this current/voltage step? I would have expected the current to go down to ~0Amp continuously without interruption.

Any suggestions? Help is much appreciated and therefore thanks in advance.

bildschirmfoto-2023-03-30-um-090329.png

Multiplus-IIbattery chargingLithium Battery
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
thorben avatar image
thorben answered ·

Anyone an idea?

1 comment
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

klim8skeptic avatar image klim8skeptic ♦ commented ·
@Thorben it looks like a load cut in, diverting current away from the battery.
0 Likes 0 ·