question

martin-rist avatar image
martin-rist asked

Mopeka Pro Sensors connection to Victron Connect App possible?

I don´t have a Cerbo. I use the Victron Connect App via Bluetooth on my smartphone for all my 6 Victron devices.

I recently got two Mopeka Pro Sensors for my gas bottles. Works perfectly fine via bluetooth with the Mopeka App.

Any chance to see the status also via the Victron Connect App on my smartphone? Would be nice to have all relevant data of my camper on one screen. Victron Connect App doesn´t find extra non Victron bluetooth devices obviously. But I´m aware that communication already works with Cerbo / Venus OS, so this is why I´m asking.
(https://www.victronenergy.com/media/pg/Cerbo_GX/en/mopeka-pro-sensor-support.html )

VictronConnect
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
theo74 avatar image
theo74 answered ·

As far as I know you need a Cerbo GX to connect the compatible Ruuvi and Mopeka BT devices.

4 comments
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

martin-rist avatar image martin-rist commented ·

Yes this I´m aware of. Seems it is not possible then unless Victron would modify their app. I was hoping that somebody already looked into this.

0 Likes 0 ·
Show more comments

Related Resources