Not entirely sure if this is possible.. My diesel generators power is a bit dirty and I don't like running my sensitive equipment on it when the Multi is in bypass mode to charge the batteries (albeit rarely). I am going to add an external 60a 48v battery charger and put a smart shunt on its output and label it in the Venus OS accordingly. What I would like to know is.. Can the geni still be connected to the AC IN of the multiplus, and the external battery charger connected to AC OUT 2 of the multi, and configure AC OUT 2 to only use geni power and never inverter power, and disable the internal charger completely. This would allow me to monitor and track generator AC output current without the use of an external AC current sensor. If this is not possible, can the victron CT clamp be used to monitor generator power to the external charger? Thanks.