question

mcs avatar image
mcs asked

Smart solar MPPT 100/20 48V

Our VW camper has leisure battery, solar panel, electric hookup setup. Following installation of the leisure electrics, everything worked as expected for about a year. For the last 6 months, I noticed on the Victron app that the MPPT charger is "off" almost all the time. I assumed during the UK winter that this was due to low light and short days. We're now in Spain. The charger seems to come on for about an hour at sunrise, and the panel voltage gets up to about 18-19v. However, the leisure battery state of charge continues to diminish, and then the MPPT switches off as the sun gets higher. There is bright sunshine in the middle of the day, but the app shows no solar voltage generated. This pattern seems the same whether we're plugged in to a campsite EHU or not. Can anyone suggest what might be happening?

MPPT ControllersSolar Panel
4 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Alexandra avatar image Alexandra ♦ commented ·
@Mcs

Likely your panels or wiring to the panels has a problem

0 Likes 0 ·
Show more comments
1 Answer
Mike Dorsett avatar image
Mike Dorsett answered ·

The input voltage to the MPPT needs to be 5V more than the battery voltage for it to start. If you panel is only 18V, and the battery at 13, then you are marginal for getting the charger to start. Once it has started, the volt difference can drop as low as 1v for sustained operation. (as mentioned above). In this case, a PWM controller would work better. Best move is to add a second module in series, or replace the 18V module with a higher voltage type.

1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

mcs avatar image mcs commented ·
Hi Mike

Thanks for that info. Am I right in thinking the 5v diff between panel and battery is needed to switch the MPPT on, but once started, it should stay on, even if the voltage diff was around 1v? In which case, if my MPPT keeps switching off, could that be a faulty MPPT?

0 Likes 0 ·

Related Resources

MPPT Product Page

MPPT Error codes

MPPT 150/60 up to 250/70 Manual

Additional resources still need to be added for this topic