question

jolilo avatar image
jolilo asked

hysteresis SOC

hello to the community.

does anyone know if it is 2.9% above the SOC Min (conversion recovery) and configurable

doesn't seem to be related to the ESS wizard voltage setting

soc.png

soc-min.png

tension-ess.png


SOC
soc.png (52.7 KiB)
soc-min.png (46.4 KiB)
tension-ess.png (19.2 KiB)
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

4 Answers
nickdb avatar image
nickdb answered ·

Yes, it is around 3%.

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

jolilo avatar image
jolilo answered ·

Thanks, Nick.


so it's not configurable?

2 comments
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

kevgermany avatar image kevgermany ♦♦ commented ·
Non, ce n'est pas
0 Likes 0 ·
jolilo avatar image jolilo kevgermany ♦♦ commented ·
Thancks
0 Likes 0 ·
kevgermany avatar image
kevgermany answered ·

And that was the limit of my french...

You have control over the point at which 100% synch is reached, also control over sensitivity to small currents. This is done in the shunt settings.

After that it's internal to the shunt/BMV.

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

jolilo avatar image
jolilo answered ·

merci, Kev mes paramètres smartshunt fonctionnent bien.

c'est quoi le lien avec c'est 3% non paramétrable ?

syncs.png



syncs.png (14.8 KiB)
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Additional resources still need to be added for this topic