question

northsyncro avatar image
northsyncro asked

Smart shunt connection to corporate control GX

Hi there! I just installed my smart shunt and connected it to the color control GX via VE direct cable.
The reading I have with the Victron connect app is good, but the color control don't connect with the smart shunt. Is there a configuration procedure needed? I also have a MPPT connected to the other VE direct port on the color control and it works well, no problem....
Setup also include a Multiplus and a BMV, everything has been working perfectly otherwise.
Thanks a lot for your help.

CCGX Color ControlSmartShunt
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Trevor Bird avatar image
Trevor Bird answered ·

I would try to reboot the CCGX and look for the shunt in “devices”.

3 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

northsyncro avatar image northsyncro commented ·

Done.....In devices I see the MPPT and the multiplus, nothing else....

0 Likes 0 ·
Show more comments