question

eliott avatar image
eliott asked

CANvu with Quattro and BMV doubled each device on VRM

Hi!


I suspect that this is a bug. After a few weeks of normal working. The Quattro and the BMV have reappeared under new device ids. After restart of the CANvu one of the entries has disappeared from the CANvu menu.

It is still on the VRM but not updating.


Any ideas?


regards

eliott



Venus OSCCGX Color Control
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
mvader (Victron Energy) avatar image
mvader (Victron Energy) answered ·

Hi @Elliot, yes I have some ideas. It relates to USB id’s being re-assigned. That, combined with the device ids being derived from the usb ids.

For which we are working on a solution; it might take a while though (months).

Thanks for raising this. I wasn’t aware yet that this was an issue on the CANvu.

4 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

eliott avatar image eliott commented ·

Hi! in the meantime I managed to "reproduce" again. I think it happens after a power interrupt and restart. If I there is anything to test, just tell me.



0 Likes 0 ·
Show more comments