question

Jonny Sollid avatar image
Jonny Sollid asked

Multiplus II, increasing AC loads in line with increasing charging

I have a multiplus II 12/3000/120-32 230V which I get increasing AC loads in line with increasing charging. At full charge 120A, I have approximately 110w consumption on AC-out. I have physically disconnected cables from AC-out 1 and 2, but still show the same result. No external current sensor connected. Anyone else who experiences this or has the same Multiplus II who can verify my findings, it would be of great help.

Multiplus-II
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
kevgermany avatar image
kevgermany answered ·

How are you measuring this?

1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Jonny Sollid avatar image Jonny Sollid commented ·

Multiplus is connected to Cerbo-gx together with a number of other Victron products. Since nothing is connected to the output on Multiplus, I suspect software or an internal leak that can give this result. If others with the same multi could test this only applies to my installation it would been great help.

0 Likes 0 ·