question

blits avatar image
blits asked

Remote firmware update

Hi, I did a successfull remote firmware update on a Multiplus II 48/5000. System has Cerbo gx, 2 x smart solar mppt 250/70 and 2 x Revov R9 11.2kwh batteries. After the update the mppt's show no Solar and not charging. Nothing changed on site. Is their something I can do remotely? Everthing was working before the update and no load was connected. The system has a changeover to grid only, so the internet connection stayed on.

Multiplus-IIMPPT SmartSolarfirmware update
4 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

ejrossouw avatar image ejrossouw commented ·

Have you tried a reboot of the cerbo?

0 Likes 0 ·
blits avatar image blits ejrossouw commented ·

Hi. Yes I did a few reboots, also a system reset and redetect in the advance menu of the Multi

0 Likes 0 ·
Show more comments
1 Answer
Matthias Lange - DE avatar image
Matthias Lange - DE answered ·

Did you converted, adjusted and uploaded the settings of the MultiPlus?

https://www.victronenergy.com/live/venus-os:remote_ve.bus_firmware_updates

1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

blits avatar image blits commented ·
Hi, I followed the instructions on Vrm, possible I made a mistake. Can I give you private access to check it out? How do we get in contact?
0 Likes 0 ·