This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hi i have a inverter wich cannot communicate with victron but used a energy meter instead.
Now it seems that there is a 25W difference between what the energy meter is detecting and what the inverter reports. Is there some way to adjust this somewhere?
In the screenshot i see -17w but this is actually 8w positive...
Without a diagram on how things are wired, it is difficult to comment. e.g. where are the grid and inverter readings coming from? One I suspect is the ET112? There is no offset parameter on the Cerbo and while the ET112 can be programmed with an octo coupler, I do not believe offset is an option. Typically you will select one source of truth. Also, inverters seldomly have precision measuring and it will also result in some discrepancies along with things such as measuring interval etc. I'd hazard a wild guess the meter is wired wrongly which results in an inverted number. See the PV inverter wiring diagram below.
https://www.victronenergy.com/media/pg/Energy_Meter_ET112/en/image/1640f1bca36886.svg">https://www.victronenergy.com/media/pg/Energy_Meter_ET112/en/image/1640f1bca36886.svg
As @ejrossouw I would also suspect measure interval. I have the same issue but it is not a big deal. Also it can vay if the inverter is including or not his own power consumption.
