question

garystevenson avatar image
garystevenson asked

EV Charging Station Setup




37da20f2-f387-4d3d-a8ce-c17ce2ec57eb.pngI’ve just had two ev chargers installed and need some assistance with the initial setup.

I’ve successfully connected to the device by scanning the code and opened a window in by browser using the ip address 192.168.0.1

My issue is that I’m presented with a screen asking for the username and password.

According to my understanding of the instructions the request for the username and password happens at step 4. 3, after creating the credentials at step 3.

I’m a bit of a novice, so would appreciate any assistance

ev charging station
37da20f2-f387-4d3d-a8ce-c17ce2ec57eb.png (556.7 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
Lucian Popescu (Victron Energy Staff) avatar image
Lucian Popescu (Victron Energy Staff) answered ·

Hi, the default user is "admin" and the password is the one on the label - same as the wifi pass

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Lucian Popescu (Victron Energy Staff) avatar image
Lucian Popescu (Victron Energy Staff) answered ·

Make sure you update it to the latest version (1.24 and soon 1.25 will be available)

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.