This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
I connected a LifePo4 and the result is a blinking alarm LED and charging LED permanently on.
I have the settings on the minimum cut-off for the battery and somewhat higher charging current than default on the inverter (changed 50A to 70A - both within the range of the battery specs).
No load.
Why the blinking alarm?
Maybe also consider downloading the handy Victron toolkit app. https://www.victronenergy.com/support-and-downloads/software
I am actually still trying to wake a sleeping lithium. Manufacturer claimed the default setting on the inverter was set set at too low a charge current but this does not seem to be the problem. The strange blinking has stopped.
I wait and see . . .
Thanks for the links I am following up.
