On the LYNX SMART BMS why does the plug on the right look so much bigger and i cannot screw the cable onto it.
asked
LYNX SMART BMS CABLE
There is one male and one female connector. Make sure your batteries are daisy-chained. There should be a male connection at one end and a female at the other end of the battery bank.
Batteries are daisy chained but the male plug at the end of the extension cable has an external thread and so does the plug that it is suppose to screw on to. Dont make sense.
Does this plug just push in . 
The screw-on threads on the plugs are a bit tight under the heat shrink tubing. Try turning them with gentle force.
