Have dual Multiplus 24/3000/70-50 set up in Split Phase 120/240 primarily to run AC Compressor during peak power cost hours.
Normal Running Load is 6-9 amps, in-rush/start-up peak is 28-35 amp using a MicroAir EasyStart Soft Start. Have 2 x 300 AHr 24V batteries and all cabling is well within Victron recommendations.
I cannot consistently start the AC without hitting overload. I've watched the tutorial on Multiplus/Quattro overloads. The only thing that makes sense is that the inverters are not reaching output voltage within the 30 cycles, but don't think that should be an issue with this configuration.
Any help on how to make this work or issolate the root cause would be appreciated.