We use a fairly large assortment of Victron products and for the most part, we have very few issues. I did just purchase several IP22s to manage both AGM & LIfePO4 batteries - the verdict is still out whether I am going to keep them.
All the MMPTs and DC|DC converters have a "charger off" setting, which allows us to shut off the charger entirely when its not needed but still leave it powered up. For whatever reason the IP22 software DOES NOT have that feature.
It comes in VERY handy when troubleshooting issues and also when we simply do not want to charge the LifePO4 battery when SOC drops to 50-60% (for storage).
To get around this, we have put the IP22 into "power supply mode" to leave it powered on and we switched the battery out of the circuit because we don't want voltage applied to the battery full time.
Ideally - we could leave the battery in the circuit (turning it off is tough - its under a panel) - and we can enable / disable the charger via bluetooth any time we want (like all the other charges can) when connected to shore power. Seems like a simple software fix to me.
