This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Community,
I have my Phoenix Smart IP43 charger setup to load my Varta Professional AGM 95ah battery.
I set the setting to AGM spiral cell, the values match w/my battery. A shame that there is no general AGM setting :(
I also have a smart sense temperature sensor linked in the smart network.
What I noticed though was that the charger at some point had 14.9-15.0 V. That is too high for the battery? I wonder because the setting AGM Spiral says 14.8 max.
Any ideas?
AGM spiral cell is not the profile of choice for your AGM. I suggest using one of the gel battery profiles or, even easier, create a preset specifically for your battery. I also have a Varta 95Ah AGM which is very happy with an absorption voltage of 14.40V and a float voltage of 13.80V.
The high voltage you are seeing is most likely the result of temperature compensation. You can see the setting for this if you turn on the "Expert" settings.
Hi Stefanie, thanks for your reply!
Yeah, I will create a new profile as suggested.
Interesting w/the temp compensation. Does that mean it would increase voltage when the battery is cold? Battery was at 9 C Celsius.
My understanding was that temp compensation only lowers voltage in very warm conditions.
