We have a BMS-712 with 2x100 Ah Relion Lithium batteries and a Renogy solar setup (3x160w panels and a 40amp Renogy Rover Charger Controller.
Also have a 3000w Power TechOn PS1006 installed.
The issue us when I put a load on the system using the Inverter; say a 1300w toaster oven, the whole system will shut down and kill the Inverter within 15 seconds?
The reason for posting on this forum is that when that happens, I hear a click sound coming from the box where I installed the Victron Shunt?
Seems the shunt is shutting off the current under heavy loads. Is that even possible?
The whole system works fine under light or medium loads.
I measured the voltage of each 12v battery under this condition and the voltage is rock solid. At first I thought there was an over voltage on the batteries causing them to shut down for a few moments but this was debunked.
Victron settings for Li Relion batteries.
Battery Capacity 200Ah
Charged voltage 14.0v
Tail Current 2.00%
Peukert Exp: 1.10
Charge Efficiency Factor 99%
Current Threshold: 0.10A
Everything else is Defaults....
Any suggestions????
Also is there a tech support number in the USA to call for Victron Engery?
Thank You for your input.