question

nesswill avatar image
nesswill asked

Smart Shunt 4.13 update changed consumed amps?

Cerbo GX latest firmware beta v3.00-20

SmartShunt x2 both v4.13

SmartSolar MPPT RS 450/100 x2 both v1.11

Inverter RS Smart 48v/6000va v1.11

1830Ah AGM Battery's

16.5Kw of Solar

Hi just updated...like you do and my consumed amps went from -117.4 to -91.33, guessing there was a calculation error that was fixed or is it something else?

ss413.jpg

(Note to mods - sorry if this should of gone into a different section please feel free to move if thats the case)

SmartShunt
ss413.jpg (68.8 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

3 Answers
mvader (Victron Energy) avatar image
mvader (Victron Energy) answered ·

Hi,

Most likely this is a one off issue due to the fw update.

Nothing to worry about.

Matthijs

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

nesswill avatar image
nesswill answered ·

Thank you very much.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

snoobler avatar image
snoobler answered ·

Did the Peukert value change?

1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

nesswill avatar image nesswill commented ·

No.

0 Likes 0 ·