This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hi All,
I'm about to install an ET340 and now insanity has kicked in.
My brain is telling me that the bottom of the ET340 (pin 4, 5 and 6) are IN (coming from the main switch/provider), and pin 1, 2 and 3 are OUT going to the "house".
However. Looking at the side of the ET340 the arrows are pointing the other way.
Anyone here who can tell me what the correct direction is?
Thank you.
I just installed a ET 340. Marks on the side of the device shows how to connect.
Dankjewel.
Just to be clear.
From grid (provider) 1,2 and 3 (top of ET 340) and to the house 4,5 and 6 (bottom of ET 340).
In that case I will need to mount the ET 340 upside down as the wires (from grid in my case) are really short.
:-(
