question

charlie22824 avatar image
charlie22824 asked

Solar Charge Controller low Temp shut off

Hello community hope all is well. I have a question for y’all though. I have a V.E Bus Smart Dongle it’s attached to one of my two batteries for the temperature reading. I noticed my Solar charge Controller has a low Temperature shut-off. Can I use the V.E Bus Smart Dongle on the V.E Smart networking as the temperature gauge to shut off my solar charge controller if the batteries are too cold. Or do I need to buy a Victron Smart battery Sense instead to make sure my Solar charger doesn’t charge when the temperature is to low.

chargersolarTemperature Sensor
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Alexandra avatar image
Alexandra answered ·

@charlie22824@

Yes the ve bus smart dongle is compatible with the smart network.

3 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

charlie22824 avatar image charlie22824 commented ·

Thank you for answering. but, unfortunately that’s not the question I was asking. What I want to know is if the built in temp sensor on the V.E smart bus will allow the solar charger controller to know when to cease charging if the batteries are to cold.

0 Likes 0 ·
Alexandra avatar image Alexandra ♦ charlie22824 commented ·

@charlie22824@

in my link above they transmit the same data

1677349654800.png


1677349681028.png


1 Like 1 ·
1677349654800.png (9.1 KiB)
Show more comments

Related Resources

Additional resources still need to be added for this topic

Victron temperature sensor disambiguation table - which product supports which sensor


Chargers.

Additional resources still need to be added for this topic