This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hi,
I have a 12/500 Multiplus with 2 105ah lead-acid batteries. With all the loadshedding, the batteries are not returning to 100% SOC.
I suspect something is off with my settings as the batteries are only at 90% even at absorption charge with zero amps going to the batteries.
Why is this happening? Does somebody know what the issue may be?
@Massyn I suspect something is off with my settings
You are connected to your multi via a MK3 usb cable?
Click on the settings cog and post screenshots of all 5 tabs please.
Yes, that’s correct
I am not with the multi now. Any specific setting that you’d like to see? Hopefully I can remember what it was.
Sorry.
@Massyn Yes, that’s correct
That's good. The Smart Networking symbol threw me for a few moments.
I am not with the multi now. Any specific setting that you’d like to see?
All 5 tabs plz.
General, charger, and AC input control have relevant settings.
The inverter and grid tabs optional. (but might be able to improve settings).
This is from the demo but same settings that I have.
general
General
AC INPUT
AC input
Okay, here are screenshots of the actual settings. Apologies @klim8skeptic , the Mulit is at my parents' place.
