This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Will the VE.direct LORAWAN portal report and display separate voltage readings for both (each) battery banks when a BMV-712 is configured in a dual bank? Though I may be mistaken, the portal demo does not appear to have a sample of BMV-712 dual bank data readings. Thank you.
Hi @Admin :o),
yes the BMV712 2nd batteries Voltage is reported to VRM. You can even view detailed graph info from your second (starter) battery in "advanced" tab on VRM.
Edit:
I just read through the LoRaWAN manual, and it seems like, that the BMV712 starter battery voltage is unfortunately not transmitted to VRM portal via LoRaWAN but the manual is indeed not very clear on this.
Maybe a Victron Staff Expert can confirm.
Regards,
Markus
Thank you for the reply and I understand what you’re saying. However, as the portal isn’t working (in my case) as you describe, I’ve attached some additional detail from another post I added seeking answers to this question. Please see below:
The starter battery voltage graph on the portal is enabled via “advanced”, but shows “no data to display” (it has no actual reported voltage data readings but the empty graph itself is there).but on the 712 device itself (the gauge), it shows the Starter Battery voltage accurately. The primary voltage is showing correctly on the portal and on the 712 as are many other reporting fields/elements,, but it appears that starter battery voltage is not reported over the LoRaWan to the portal. Is this a LoRaWAN device configuration issue or is it a design limitation of the LoRa device reporting? Starter battery voltage reporting is required in this installation in addition to the primary bank voltage reporting.
I saw that in the docs as well and agree it’s less than clear. I’ll hope for confirmation one way or another from a Victron SE. Thank you for your efforts.
