question

pioneer01 avatar image
pioneer01 asked

MPPT 100/20 Load switch low voltage level

I configured MPPT load output with low voltage level 22,0 V and high voltage 25,0 V as you can see in the screenshot.

bildschirmfoto-2023-02-13-um-215544.png

Basically everything works really fine but I don't know why load output is disconnected at ~22,3 V every day:

bildschirmfoto-2023-02-13-21-47-33.png


Does anybody have an explanation for that? Jumper is removed and Raspberry Pi with Venus OS connected on VE.Direct Port.

Thanks for your support!


MPPT Controllers
bildschirmfoto-2023-02-13-um-215544.png (129.8 KiB)
bildschirmfoto-2023-02-13-21-47-33.png (75.0 KiB)
2 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Alexandra avatar image Alexandra ♦ commented ·
@pioneer01

Maybe just a reading difference. Have you tried adjusting your cut off voltage 0.3v lower?

0 Likes 0 ·
Show more comments
1 Answer
pioneer01 avatar image
pioneer01 answered ·

It seems that there is an offset of about 0,3V. I configured cut off voltage with 21,7 V now. MPPT disables load at 22,0 V now.

Can somebody explain this behavior?

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.