Hi, I'm Peter,
Since a few weeks I own a few Victron-products, all works good, but get stuck at a few settings.
Hope that somebody can help me out!
I've a VW Crafter-van, with a MultiPlus 12/3000/120-16 with original a GEL-accu.
This accu i've changed for a 300a LiFePo4. Then I updated all firmware (156-->501) and changed all settings to Lithium, like charge at 14.4v instead of 13.8 ect.
Also I changed the Accumonitor from 90 amp to 300 amp, at the first tab.
All looks good, but its not completly: My percentage of says 50%, where it is 0% in real.
So my 12v LiFePo4 it for example: 10-11v, but VRM says: 50%
I figured out, that this looks like my "Peukert-setting". My guess it that its now like 1.25 and has to be 1.05.
I can not find where to change this "Peukert".
I've tried all tabs in VE Config and the newer VictronConnect.
Offcourse I unlock the settings, but still cannot find it.
The only examples in screenshots, are in a BMV-712, what i don't have.
So please. can somebody point me to Peukert, of help me find the solution, for this "wrong battery percentage"?
I'm looking for something, like this below.
Note: this screenshot, is not mine, but the example !!