question

jan314 avatar image
jan314 asked

Two MMPT75 and one Inverter - How to connect?

Hi,

Can anyone tell me how to connect my Inverter and also preserve the Battery Life Charge Algorithm, so the Inverter will be disconnected on low volatage?


Greetings from Berlin,

Jan

MPPT ControllersMultiPlus Quattro Inverter ChargerBattery Protect
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
markus avatar image
markus answered ·

Hi Jan,

this is a Victron Community Forum, we can not really assist you with your non Victron inverter here.

You must not connect your inverter to the Battery Protect 65. The inverters inrush current would be too much. Even for the bigger Battery Protect units, it is not advised to connect a high current inverter.

I would suggest to buy a Victron inverter and use it's remote on/off functionality...

Regards,

Markus


2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.