question

manuele avatar image
manuele asked

Know the pinout of the three-pole energy meter connector on the Multiplus II GX.

Hello, I have a multiplus II gx, I noticed now that there is a connector to connect the energy meter, would it be possible to have the exact pinout of the connector? Is it also necessary to connect the ground? In case where?

Multiplus-II
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
Stefanie (Victron Energy Staff) avatar image
Stefanie (Victron Energy Staff) answered ·

Hi @Manuele,

Do you mean the current sensor? You connect the white and red wire only. GND/cable shielding is not connected.

bildschirmfoto-2023-02-12-um-140340.png


bildschirmfoto-2023-02-12-um-140132.png



bildschirmfoto-2023-02-12-um-140132.png (40.3 KiB)
bildschirmfoto-2023-02-12-um-140340.png (406.5 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

manuele avatar image
manuele answered ·

Thanks, I missed it.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.