Bit of a newbie question.
I have a 100/30 mttp with 3 Victron 140W Solar Panel – Monocrystalline Panel in series hooked into a 200ah lithium 12v battery
Solar specs sre:
140w
Voc 23.6 open circuit voltage
Isc 8.05
Llmp 7.22
Vmpp 19v
So everything is in tolerance…I believe, and all working. I am trying to maximise the set up, so am considering adding an additional panel that would oversize it
System located in Scottish Highlands, so northern hemisphere and low number of optimal days
If I add another panel, by my calculations 4 panels in series - 27% oversized
Watt = 560
Voc = 94.4
Amp = 8.05
Does this look correct? Will this be ok?
Does anyone have any other suggestions for maximising the above, like wiring panels in parallel?
Many thanks