Hi @alexw

Unfortunately not. Bluetooth is the only way to read cell-level values incl. temp.

There are some smart guys from the Signal K group currently working on a Signal K plugin hat reads Victron data over Instant readout Bluetooth Low Energy (BLE) messages from supported devices. Smart lithiums haven't been integrated yet but they are working on it.

Once released, you could use that plugin via Signal K to get the data you want.

Keep watching the following links:

https://www.npmjs.com/package/signalk-victron-ble

https://github.com/stefanor/signalk-victron-ble

@alexw If you'd like to help add support for the Smart Lithium, can you share a few advertisement examples using the instructions from https://github.com/keshavdv/victron-ble#development and sharing it in a Github issue? The protocol has generously been released by Victron, but I'd love some real world data to use for unit tests and I don't have one personally to be confident it works.

okeplay

Not quite there yet. I still need to install the long cable and I am also installing a few other cables at the same time so that I hopefully don't have to drill more holes for more cables later.