I have a system with 3 single phase Quattro 24/3000/70-2x50 that create a 3phase system. In the AC In 1 is connected the grid and in the AC Out 1 are connected the loads. The Battery of the system is an LFP Smart 25,6 200Ah and the whole system is monitored by a CCGX device. The problem is that the Quattro inverter doesn't calcualtes the SoC of the Battery and therefore is not displayed on the CCGX (always remains 0%). In the CCGX device is selected the Quattro as the Battery Monitor.
What causes that problem?