question

cw8 avatar image
cw8 asked

Multiplus and DMC + Cerbo does not work - any advice?

I have a working Multiplus 12/3000/120 system, which includes a Cerbo GX.

When I try to also connect a 200/200 Digital Multi Control Panel GX, it simply does not work. The MP will not turn on. If I disconnect the Cerbo, then the DMC works. With both connected, the MP simply does not turn on, no lights, nothing.

FWIW, I've tried this with two DMC units; I assumed the first was bad.


Others have had this problem: https://community.victronenergy.com/questions/86659/multiplus-digital-multicontrol-and-cerbo.html but that post did not have any solutions. Are there any? Are they supposed to work together? That post indicates they should. Thanks!

MultiPlus Quattro Inverter Chargercerbo gxDigital Multi Control
4 comments
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

klim8skeptic avatar image klim8skeptic ♦ commented ·

Did you read these notes? Multi has to be "ON".

multi-dmc.png


cerbo-dmc.png


0 Likes 0 ·
multi-dmc.png (42.9 KiB)
cerbo-dmc.png (45.8 KiB)
Show more comments
2 Answers
cw8 avatar image
cw8 answered ·

Well, I've now tried brand new cables and still have the same problem. For this reason and other reasons, I am beginning to suspect a bad Cerbo unit. I will start another thread.

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

cw8 avatar image
cw8 answered ·

Found the problem. See https://community.victronenergy.com/questions/187427/should-multiplus-show-up-in-the-cerbo-devicelist.html

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources