question

Juraj Nikolov avatar image
Juraj Nikolov asked

EasySolar II 5kVA runnigng generator via SOC state using relay




The main thing I'm missing is a Relay1 that I could use to control the generator based on the SOC status.
If the GX is highlighted in red in the picture, is it possible to use its pins to control relay 1? Which are obviously not used.
If so, what relay is used by default (parameters) ???

Or is it possible to control the running generator via the SOC state, via the contact Aux relay ??? Item D in the attached image. :)
Or if it is not possible to use the options described above, is there another option than run the generator via SOC state?
1675528773317.png1675528820231.png


Thanks for help.

JN

GeneratorEasySolar All-in-OneRelay
1675528773317.png (320.7 KiB)
1675528820231.png (156.6 KiB)
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Juraj Nikolov avatar image
Juraj Nikolov answered ·

SubQuestion :)
Can I use Ve.config to configure programmable relay (AUX RELAY ???) so... :1675533614023.png


1675533650954.png

D = Aux relay




1675533614023.png (288.0 KiB)
1675533650954.png (158.8 KiB)
4 comments
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources