question

Todd Wackford avatar image
Todd Wackford asked

Can Multiplus use temperature and voltage readings from MV-712 thru Venus Device?

Can Multiplus use temperature and voltage readings from MV-712 thru Venus Device? If so, how do you set it up?

MultiPlus Quattro Inverter ChargerBMV Battery MonitorvoltageTemperature Sensor
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Mark avatar image
Mark answered ·

Yes, using the Venus device menus enable DVCC, then enable SVS (shared voltage sense) & STS (shared temperature sense).

4 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

tkrohmer avatar image tkrohmer commented ·

Would it also work with a CCGX?

0 Likes 0 ·
Mark avatar image Mark ♦♦ tkrohmer commented ·

Yes, no problem.

Just go into the settings and activate DVCC, then SVS and STS.

0 Likes 0 ·
tkrohmer avatar image tkrohmer Mark ♦♦ commented ·

I already did that and couldn't make it work properly, maybe my multiplus is dead. I made a separate question for my case, I would really apreciate if you could look at it.


https://community.victronenergy.com/questions/30767/can-i-use-dvcc-with-ccgx-bmv-700-and-multiplus-com.html

0 Likes 0 ·
Mark avatar image Mark ♦♦ tkrohmer commented ·

To keep the discussion on track, I have provided you with an answer in your post - please refer to that.

https://community.victronenergy.com/questions/30767/can-i-use-dvcc-with-ccgx-bmv-700-and-multiplus-com.html

0 Likes 0 ·