This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
hi
I need help with my multiplus-ii feeding power to the grid even when my grid set point is 70w. Everyday when my battery is at 100% and my multiplus-ii goes to fload mode it tends to feed to the grid and causes my grid meter to trip. I have a current transformer conected to it. Please see below picture.
Small amounts of feed in is normal when an inverter is running in grid interactive mode (ESS). This is because the inverter has to react to fluctuations on the AC input from the grid.
You need to raise the set point so that it does not feed in.
