Hello, I'm struggling to get desired behavior out of a Cebro with a Ruuvi.
I want to close the NO relay 2 when temperature drops below a certain number, and then deactivate when it gets over a certain number. ie, to heat a battery box.
I have the ruuvi connected and reading 21C. I've set the relay to activate at 23 and deactivate at 25. Just for testing.
The Cerbo can see that it's at 21C, but it shows active with the range of 23-25.
Now, flipping the logic. Activate at 22, deactivate at 0. Shows active, but if I reduce the activate to 16 it should deactivate the relay. However, it does not. Still shows active.
Am I doing something wrong here? Can someone straighten me out on the logic?