question

alex-la-mela avatar image
alex-la-mela asked

PYLONTECH+CERBOGX+SMARTSOLAR AND ANY NOT HYBRID INVERTER

Hi, I have a pylontech us5000 48v/5000 connected with cerbo gx and a smart solar mttp charger connected by ve.bus .

I have also a 5000w made in china inverter without any bus (it has only 4 line, 2 for battery connect and 2 to output 220v) and i have an old victron phoenix inverter without bus. Can I connect Pylontech battery to my inverter only using Vcc e Gnd Lines?

cerbo gxPhoenix InverterPylontech
3 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Alexandra avatar image Alexandra ♦ commented ·
@ALEX LA MELA

Not supported.

Is this for a data connection?

You realise that the Pylontec should only have comms with one system?

If you want the system to switch off the chinese one, why not use a relay from the cerbo?

0 Likes 0 ·
Show more comments
0 Answers