question

markhandley avatar image
markhandley asked

Just Sharing - Victron Energy, Cerbo GX, Temperature controlled fans

Recently, I was setting up 2 Victron Energy, Orion-Tr Smart DC-DC charger to 2 fans, controlled by Victron Energy, Cerbo GX. Using Stixs 3D printing, Victron Energy DC to DC/Orion cooling stand and Stixs 3D printing, Victron Energy Cerbo-Gx standoff. Zac at Stixs 3D printing has done a great job of including a 4 pin plug with his cooling stand. You could also use any of Victron Energy MPPT solar charge controllers.


My build steps are with the pdf file attached.

https://w2ure-my.sharepoint.com/:b:/g/personal/mark_w2u_com_au/EQSwwr7ZqyNGq4yBoc0HXJAB5_MCBtRcK23ekq04hhk9Tg?e=j7ipsr


Products from:

Victron Energy https://www.victronenergy.com/

Stixs 3D printing https://www.facebook.com/Stixs3D https://www.ebay.com.au/usr/zacripp_6?_trksid=p2047675.m3561.l2559

MPPT Controllerscerbo gxorion dc-dc
2 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

jjbond avatar image jjbond commented ·

Does he have one that fits the 250/100? I know you said one size fits all but I'm not sure that's correct, the 250's pretty big and his eBay ad photos seem to show prespaced/drilled holes... thank you for the info though.

0 Likes 0 ·
Show more comments
1 Answer
markhandley avatar image
markhandley answered ·

Now @ ebay - https://www.ebay.com.au/usr/zacripp_6?_trksid=p2047675.m3561.l2559

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.