This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hi @JasonTav,
you can't combine GX Device with that setup, unfortunately. A GX Device does not control the MPPTs based on input read via VE.Bus. Why? Because an Inverter/charger might be switched off.
ps, more information about how to use a GX Device, Smart Lithium Batteries & MPPTs is here:
https://community.victronenergy.com/articles/15035/victron-vw-van-electrics-install-schematic-drawing.html
OK I read the manual.
Seems Venus communicates via ve.bus with the BMS and controls the mppt via its ve.direct connection, so the ve.direct non-inverting remote on/off cable from the BMS to the mppt isn't required.
If anyone can confirm my thinking here I'd be glad to hear
Additional resources still need to be added for this topic
MPPT 150/60 up to 250/70 Manual
Victron Venus OS Open Source intro page
Venus OS GitHub (please do not post to this)
9 People are following this question.