Hi Guys. Please help to me to make a right setting of my system:
I monitoring my system and I saw the Quattro cannot keep the battery voltage in Absorption on 56.8V , always the battery voltage go to 57.1v or 57.2v.
-Also I saw the response of Quattro to reduce the Fronius Power (by frequency ) is too slow and Battery Current( Amp) and Volts (V) go up .
No any alarm on my system but I am worried about my battery
Quattro Charger setting is : Absorption 56.8V ; Float 56.6V. Max Charge amp are 50A
-On both Fronius I setup already MG50.
-On Quatro I setup already PV Inverter support :
State | 50Hz | . | |
Start | 51.0 | Hz | |
Minimum | 52.7 | Hz | |
Disconnect | 53.0 | Hz |
My system already installed below.