Relay to control remoteport on inverter

Question

replit

This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.

question

matteburk asked Jan 25, '23

Hi

Can I use a 220v relay like this to control the remote port on my Phoenix 12/1200 inverter?

/Mattias

Phoenix Inverter Relay

skarmavbild-2023-01-25-kl-224547.png (386.4 KiB)

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 1 · 2023-01-25T22:13:56Z

christianf250 answered · Jan 25, 2023 at 10:13 PM

Hi, yes is possible to use this relay for the application you need.

Is possible to use a little switch to, is a low voltage pass on this jumper.
toogle switch

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 2 · 2023-01-26T12:44:35Z

matteburk answered · Jan 26, 2023 at 12:44 PM

My concern is if the relays have enough isolation so I can't damage the inverter...

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.