question

guy-cashmore avatar image
guy-cashmore asked

Multi PowerAssist minimum input - what actually happens when you set it lower?

Hi,


I have a 230V Multi Compact 12/2000/80/30 that has a minimum input current when using PowerAssist listed at 4.5A on the professional pages (not sure why this model is higher than the other 12/2000 model which is 2.4A?).


The generator I would like to use with it is a Honda EU10i that has a rated maximum of 3.9A and an intermittent maximum of 4.3A.


So what actually happens if I set a current limit of say 3.5A using VEConfig, will the Multi ignore the setting and use 4.5A, or will it attempt to limit to 3.5A but perhaps be unstable?


Thanks! Guy.

MultiPlus Quattro Inverter Charger
2 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

klim8skeptic avatar image klim8skeptic ♦ commented ·

I have a Multi Compact 12/2000/80/30 that has a minimum input current when using PowerAssist listed at 4.5A on the professional pages (not sure why this model is higher than the other 12/2000 model which is 2.4A?).

A 240v multi will have approx 1/2 the input current limit of a 120v multi.

What ac voltage multi do you have?

0 Likes 0 ·
Show more comments
1 Answer
shaneyake avatar image
shaneyake answered ·

You can't set it below the minimum, it will just jump back to the minimum if you try do that.

1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

guy-cashmore avatar image guy-cashmore commented ·

Thanks, I haven't actually tried it on the 12/2000/80/30, but when I tried the setting on a 24/3000/70/32 just to see what happened it allowed me to set any value down to 1A. I wasn't able to test run it though as it was for another application.

0 Likes 0 ·